Metrology
2026-09-08 by Marcus Feld
After a suspicious Absolute Digimatic caliper and a 45 multimeter reached our floor, our Hexagon CMMs caught the problem. The lesson? Check before use—and know where to buy Fluke multimeter safely.
Continue reading
Metrology
2026-09-08 by Marcus Feld
Emergency measurement checklist for rush quality calls: when to pick a Hexagon Global S CMM or a Hexagon portable CMM, how to answer 'which multimeter should I buy', when a portable oscilloscope earns its case, and how to read a Sensus water meter without making the unit mistake.
Continue reading
Metrology
2026-09-07 by Marcus Feld
What 180 rush metrology jobs taught me about buying measuring tools. Includes how to read a Starrett micrometer, when to use a 12-inch caliper, and when a Hexagon portable CMM is worth the cost.
Continue reading
Metrology
2026-09-07 by Marcus Feld
A quality compliance manager's account of why high-end measurement instruments fail silently — from CMM drift to contaminated pipettes to unverified resistance testers — and why the cheapest purchase decision is often the most expensive one. Includes ISO-based verification advice and pipette cleaning steps.
Continue reading
Metrology
2026-09-04 by Marcus Feld
Which Fluke multimeter do I need? A procurement manager compares Fluke 116, 117, and 87V by real work scenario, plus when to add a differential pressure sensor or One Pro LT thermal imaging camera.
Continue reading
Metrology
2026-09-04 by Marcus Feld
A first-person story about an emergency order: coordinating Hexagon CMM machine calibration, a 117 multimeter check, sensor distributor choices, and the right Agilent HPLC fittings before an FDA audit.
Continue reading
Metrology
2026-09-03 by Marcus Feld
An office administrator’s story about sourcing Hexagon CMM probes, a flow meter, a Carl surgical microscope, and Fluke multimeter guidance—and why the lowest quote didn’t win.
Continue reading
Metrology
2026-09-03 by Marcus Feld
A Hexagon quality manager explains why Hexagon Metrology CMMs, differential pressure transmitters, the centrifuge 5804, and insulation testers fail incoming inspection—and why 'insulation tester vs megger' is the wrong question.
Continue reading
Metrology
2026-09-02 by Marcus Feld
Practical answers about Hexagon CMMs, multimeter prices, profile projectors, and Eppendorf pipette calibration—from someone who has rejected more than a few non-conforming deliveries.
Continue reading